SLA(Stereolithography) ndeyekuwedzera yekugadzira maitiro inoshanda nekutarisa UV laser pane vat yephotopolymer resin.Nerubatsiro rwekombuta inobatsira kugadzira kana komputa inobatsira dhizaini (CAM/CAD) software, iyo UV laser inoshandiswa kudhirowa pre-yakarongwa dhizaini kana chimiro pamusoro peiyo photopolymer vat.Photopolymers inonzwa kune ultraviolet chiedza, saka resin inosimbiswa photochemically uye inoumba imwechete yechinhu chinodiwa che 3D.Iyi nzira inodzokororwa kune yega yega dhizaini kusvika chinhu che3D chapera.
CARMANHAAS inogona kupa mutengi iyo optical system inonyanya kusanganisira inokurumidza Galvanometer Scanner uye F-THETA scan lens, Beam expander, Mirror, nezvimwe.
355nm Galvo Scanner Musoro
| Model | PSH14-H | PSH20-H | PSH30-H |
| Mvura inotonhorera / yakavharwa scan musoro | Ehe | Ehe | Ehe |
| Aperture (mm) | 14 | 20 | 30 |
| Inoshanda Scan Angle | ±10° | ±10° | ±10° |
| Chikanganiso chekutevera | 0.19 ms | 0.28ms | 0.45ms |
| Nhanho Yekupindura Nguva (1% yechiyero chakazara) | ≤ 0.4 ms | ≤ 0.6 ms | ≤ 0.9 ms |
| Typical Speed | |||
| Positioning / jump | <15 m/s | <12 m/s | <9 m/s |
| Line scanning/raster scanning | <10 m/s | <7 m/s | <4 m/s |
| Typical vector scanning | <4 m/s | <3 m/s | <2 m/s |
| Hunhu hwakanaka hwekunyora | 700 cps | 450 cps | 260 cps |
| Kunyora kwepamusoro | 550 cps | 320 cps | 180 cps |
| Precision | |||
| Linearity | 99.9% | 99.9% | 99.9% |
| Resolution | ≤ 1 urad | ≤ 1 urad | ≤ 1 urad |
| Kudzokorora | ≤ 2 urad | ≤ 2 urad | ≤ 2 urad |
| Temperature Drift | |||
| Offset Drift | ≤ 3 urad/℃ | ≤ 3 urad/℃ | ≤ 3 urad/℃ |
| Qver 8hours Yakareba-Yakareba Offset Drift (Mushure me15min yambiro-up) | ≤ 30 urad | ≤ 30 urad | ≤ 30 urad |
| Operating Temperature Range | 25℃±10℃ | 25℃±10℃ | 25℃±10℃ |
| Signal Interface | Analogi: ± 10V Digital: XY2-100 protocol | Analogi: ± 10V Digital: XY2-100 protocol | Analogi: ± 10V Digital: XY2-100 protocol |
| Kupinza Simba Chinodiwa (DC) | ±15V@ 4A Max RMS | ±15V@ 4A Max RMS | ±15V@ 4A Max RMS |
355nm F-Theta Lenzi
| Chikamu Tsanangudzo | Kureba kwakatarisana (mm) | Scan Field (mm) | Max Entrance Mudzidzi (mm) | Chinhambwe chekushanda(mm) | Mounting Thread |
| SL-355-360-580 | 580 | 360x360 | 16 | 660 | M85x1 |
| SL-355-520-750 | 750 | 520x520 | 10 | 824.4 | M85x1 |
| SL-355-610-840-(15CA) | 840 | 610x610 | 15 | 910 | M85x1 |
| SL-355-800-1090-(18CA) | 1090 | 800x800 | 18 | 1193 | M85x1 |
355nm Beam Expander
| Chikamu Tsanangudzo | Kuwedzera Ratio | Input CA (mm) | Zvakabuda CA (mm) | Housing Dhiya(mm) | Housing Kureba(mm) | Mounting Thread |
| BE3-355-D30:84.5-3x-A(M30*1-M43*0.5) | 3X | 10 | 33 | 46 | 84.5 | M30*1-M43*0.5 |
| BE3-355-D33:84.5-5x-A(M30*1-M43*0.5) | 5X | 10 | 33 | 46 | 84.5 | M30*1-M43*0.5 |
| BE3-355-D33:80.3-7x-A(M30*1-M43*0.5) | 7X | 10 | 33 | 46 | 80.3 | M30*1-M43*0.5 |
| BE3-355-D30:90-8x-A(M30*1-M43*0.5) | 8X | 10 | 33 | 46 | 90.0 | M30*1-M43*0.5 |
| BE3-355-D30:72-10x-A(M30*1-M43*0.5) | 10X | 10 | 33 | 46 | 72.0 | M30*1-M43*0.5 |
355nm Mirror
| Chikamu Tsanangudzo | Dhayamita(mm) | Hukobvu(mm) | Coating |
| 355 Mirror | 30 | 3 | HR@355nm,45° AOI |
| 355 Mirror | 20 | 5 | HR@355nm,45° AOI |
| 355 Mirror | 30 | 5 | HR@355nm,45° AOI |
